Integrated air tank air dryer screw air compressor
Belt driven type Screw Air Compressor Specifications
* Genuine belt to meet the demand of heavy-duty, long life and high reliability.
* Convenient belt tensioning device makes the maintenance easy,and the transmisstion high-efficiency is ensured.
* Provide the flexibility for the customers easily modify the working pressure if a change becomes necessary.
* Low operation cost
* Energy saving
KP-LB Belt Drive Integrated Type Screw Air Compressor with air tank air dryer
Power range: 20hp ~ 600hp
Pressure: 7-13 Bar
* 7bar/8bar/10bar/12.5bar working pressure(discharge pressure) for your selection (for more lower pressure 4bar or 6bar, please send your inquiry )
* Intelligent microcomputer control system, controller has the remind & record function, show the compressor operation situation clearly
* Superior components, low maintenance cost
* Germany OPTI belt, easy for replace, and ensure the product quality
* Oversize air-end, low rpm, no overheat problem
* IP54/IP55 high quality motor, SKF bearing, Class F level insulation; Class BTemperature rise;
* Discharge temperature= Ambient temperature+15ºC, with cooling/ventilation system tailor made to the same local hot-humid climatic condition, NO OVERHEATING ON CONTINUOUS 100% LOAD IS GUARANTEED!
* Top door is locking design, easy to open to clean the cooler and fan
*Compressor is filled with lubrication oil before delivering, you can operate it after installed and powered on. Once it run 500hours to change the new air filter and oil filter was set for first maintenance, then normally change them with 2000-3000hours for once maintenance replacing new one.
* Phase reversal protection, current overload protection, pressure protection, overheat protection
Technical Parameters of LB-TY Fixed Belt Drive Screw Compressor | ||||||||
Model No. | Motor Power (kw) | Horse Power (Hp) | Air delivery(m³/mim) | Working pressure(bar) | Air Dryer Model | Air Tank (L) | L*W*H(mm) | N.W(KG) |
LB-4TY | 4 | 5.5 | 0.74 | 7 | HAD-001-1NF (1.0m3/min) | 250L | 1400*670*1550 | 400 |
0.66 | 8 | |||||||
0.56 | 10 | |||||||
LB-5.5TY | 5.5 | 7.5 | 0.8 | 7 | HAD-001-1NF (1.0m3/min) | 250L | 1400*670*1550 | 450 |
0.7 | 8 | |||||||
0.6 | 10 | |||||||
LB-7.5TY | 7.5 | 10 | 1.2 | 7 | HAD-001NF (1.6m3/min) | 250L | 1400*670*1550 | 500 |
1.1 | 8 | |||||||
1 | 10 | |||||||
0.8 | 13 | |||||||
LB-11TY | 11 | 15 | 2.0 | 7 | HAD-003NF (2.7m3/min) | 300L | 1400*670*1550 | 550 |
1.6 | 8 | |||||||
1.42 | 10 | |||||||
1.14 | 13 | |||||||
LB-15TY | 15 | 20 | 2.5 | 7 | HAD-003NF (2.7m3/min) | 300L | 1150*800*1100 | 390 |
2.3 | 8 | |||||||
2 | 10 | |||||||
1.75 | 13 | |||||||
LB-18.5TY | 18.5 | 25 | 3.1 | 7 | HAD-003NF (3.8m3/min) | 250L*2 | 1650*800*1840 | 620 |
2.9 | 8 | |||||||
2.6 | 10 | |||||||
2.2 | 13 | |||||||
LB-22TY | 22 | 30 | 3.5 | 7 | HAD-003NF (3.8m3/min) | 250L*2 | 1650*800*1840 | 700 |
3.3 | 8 | |||||||
3.0 | 10 | |||||||
2.6 | 13 | |||||||
*According to the standard of GB19153-2009 *Compressor Stage: Single Stage Compression *Standard Power Supply: 380V/50Hz/3ph *Exhaust Temperature: Ambient Temperature +15ºC *Configurated normal temperature type Air dryer,with Dew Point range: 3-10ºC; *Please contact us for any specification that is not within the above mentioned standard. | ||||||||
Welcome to join us ! We Consider Our Customers as Our Friends and Families, and We do Believe in the Win-Win Situation for Building up Long-Term Relationship. • Innovation Provide innovative, stable products and services. • Quality Deliver consistently superior performance and pursue every possible improvement. • Agility Identify emerging trends and act quickly to acquire new opportunities. • Customer Satisfaction Anticipate customer needs and exceed their expectations. • Warranty Within 12 months since the customer used,or 18 months since shipped from factory, no matter which expires, we ensure that no defects for material and manufacturing. | ||||||||
Name | 7.5KW Belt Driven Integrated Screw Air Compressor | |||||
Model | SLB-7.5-7 | SLB-7.5-8 | SLB-7.5-10 | SLB-7.5-13 | ||
Specification | Working pressure | bar | 7bar | 8bar | 10bar | 13bar |
Air delivery | M³/min | 1.15m3/min | 1.06m3/min | 0.85m3/min | 0.65m3/min | |
Motor power | KW | 7.5KW | ||||
Voltage | V | 380V/50Hz/3ph (other voltage need to take 20days customize produciton ) | ||||
Outlet dia | G3/4 | |||||
Weight | Kg | 280 | ||||
Dimension | (L*W*H)mm | 1650*800*1700mm (Integrated compressor+dryer+tank) | ||||
Compressor type | Single Stage | Screw | ||||
Start mode | Delta Start | |||||
Cool method | Air cooled | |||||
Driven method | belt driven | |||||
Discharge temp | ºC | Ambient temp+10-15ºC | ||||
Compressed oil content | ppm | ≤3PPM | ||||
Noise | dB(A) | 78 | ||||
Motor Protection grade | (IP54) | IP54 / Class F insulation/ Class B temperature rise | ||||
Max ambient temp | ºC | ≤40ºC | ||||
Control mode | PLC | MAM PLC | ||||
Lubricant Oil replace regular time | H | 3000hrs(First runing time only 500hrs) | ||||
Oil separator replace regular time | H | 3000hrs | ||||
Oil Filter replace regular time | H | 3000hrs(First runing time only 500hrs) | ||||
Air filter element replace regular time | H | 3000hrs(First runing time only 500hrs) | ||||
Configured Refrigerated Air Dryer Specification | m3/min | 1.2m3/min | ||||
Voltage | 220V/50Hz/1ph | |||||
Configured Air Tank Volume | L | 300L (GB-150 standard pressure vessel) |
KEEPWIN TECHNOLOGY HEBEI CO.,LTD is a high-tech joint-stock enterprise which specializes in the development and designing, manufacturing and installation, mating remolding, and sales service of compressors as well as the corresponding pre-and post-position purifying equipment. KEEPWIN offers you a various range of gas compressors like normal standard screw compressor, piston compressor, diaphragm compressor, CNG compressor, CO2 compressor, Hydrogen compressor, Nitrogen booster compressor, etc. for your process handling needs. These products are developed with the highest level of professionalism and innovation. The premium-grade raw material and advanced technology is utilized in the production process, which assists us in giving required shape, design, and finish to the finished products. The products are then sent to the Quality Control Department for stringent quality tests on various parameters.
Keepwin Gas Solution Engineer can customize any special gas Reciprocating Piston Compressor & high pure gas flammable gas oil-free Diaphragm Compressor, and Industry using Screw Air Compressor & Portable Piston Air Compressor.
A. The gas compression medium
B. The flow rate: _____Nm3/hr
C. Inlet pressure: _____ Barg(gauge pressure)
D. Discharge pressure: _____ Barg(gauge pressure)
E. Inlet gas temperature & Outlet gas temperature
F. Cooling water temperature as well as other technical requirement.
G. Voltage/Frequency/Phase
The compressed medium may also include flammable and explosive gas, such as Natural Gas, Coal Gas ,coking gas, oxygen gas, Hydrogen gas, as well as special gas which are toxic gas and corrosive gas, radioactive gas. KEEPWIN has taken a series of technical measures in aspects such as structure material, explosion prevention, auto-control and protection to guarantee safety and reliability.
The products are stable,reliable and have already been in series and modularized.keepwin can aslo rapidly provide products of other specifications through modular combination design upon users' requirements.
Customer Case
FAQ
Q1: What's your delivery time?
A: Generally screw compressor with 20-30 days, Reciprocating compressor & diaphragm high pressure gas comrpessor with 12-20weeks to customize producing.
Q2: How long is your air compressor warranty?
A: Usually 1 year /12 Months for whole compressor machine, 2years/24months for air end (except maintenance spare parts.). And we can provide further warranty if necessary.
Q3: How long could your air compressor be used?
A: Generally, more than 10 years.
Q4: Can you do OEM for us?
A: Yes, of course. We have around two decades OEM experience.And also we can do ODM for you.
Q5: What's payment term?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, Trade Assurance and etc. Also we could accept USD, RMB, GBP, Euro and other currency.
Q6: How about your customer service?
A: 24 hours on-line service available. 48hours problem sovled promise.
Q7: How about your after-sales service?
A: 1. Provide customers with intallation and commissioning online instructions.
2. Well-trained engineers available to overseas after-sales service.
Q8. Are you factory?
A4: Absolutely! You have touched the primary sources of Air Gas Compressor. We are factory.
How to contact with us?
Send your Inquiry Details in the Below, or Click "Back to Home" to check more other Gas Compressor machine equipment!
A: Generally screw compressor with 20-30 days, Reciprocating compressor & diaphragm high pressure gas comrpessor with 12-20weeks to customize producing.
Q2: How long is your air compressor warranty?
A: Usually 1 year /12 Months for whole compressor machine, 2years/24months for air end (except maintenance spare parts.). And we can provide further warranty if necessary.
Q3: How long could your air compressor be used?
A: Generally, more than 10 years.
Q4: Can you do OEM for us?
A: Yes, of course. We have around two decades OEM experience.And also we can do ODM for you.
Q5: What's payment term?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, Trade Assurance and etc. Also we could accept USD, RMB, GBP, Euro and other currency.
Q6: How about your customer service?
A: 24 hours on-line service available. 48hours problem sovled promise.
Q7: How about your after-sales service?
A: 1. Provide customers with intallation and commissioning online instructions.
2. Well-trained engineers available to overseas after-sales service.
Q8. Are you factory?
A4: Absolutely! You have touched the primary sources of Air Gas Compressor. We are factory.
How to contact with us?
Send your Inquiry Details in the Below, or Click "Back to Home" to check more other Gas Compressor machine equipment!