Factory direct price 200KW electric air pump oil free air compressor
Technical Parameters Of PM Variable speed screw air compressor:
| Model | Work pressure | Capacity | Power | Noise | Inlet and outlet diameters of cooling water | Water inlet & outlet T/H | Lubricating water L | Dimensions | Weight | Air outlet diameter |
| WZS-06PMA | 0.8 | 0.3~0.78 | 5.5 | 57 | 3/4″ | 1.5 | 10 | 800x800x1100 | 460 | 3/4″ |
| 1.0 | 0.2~0.65 | |||||||||
| WZS-08PMA | 0.8 | 0.35~1.17 | 7.5 | 57 | 3/4″ | 2 | 10 | 800x800x1100 | 510 | 3/4″ |
| 1.0 | 0.3~1.05 | |||||||||
| 1.25 | 0.24~0.81 | |||||||||
| WZS-11PMA | 0.8 | 0.54~1.72 | 11 | 60 | 1″ | 2.5 | 26 | 1200x800x1300 | 620 | 3/4″ |
| 1.0 | 0.45~1.42 | |||||||||
| 1.25 | 0.35~1.10 | |||||||||
| WZS-15PMA | 0.8 | 0.75~2.43 | 15 | 60 | 1″ | 3.5 | 26 | 1200x800x1300 | 670 | 1″ |
| 1.0 | 0.65~2.17 | |||||||||
| 1.25 | 0.6~1.85 | |||||||||
| WZS-18PMA | 0.8 | 0.9~3.13 | 18.5 | 63 | 1″ | 4 | 30 | 1400x1000x1520 | 730 | 1″ |
| 1.0 | 0.9~2.82 | |||||||||
| 1.25 | 0.6~2.05 | |||||||||
| WZS-22PMA | 0.8 | 1.1~3.62 | 22 | 63 | 1 1/2″ | 5 | 30 | 1400x1000x1520 | 780 | 1″ |
| 1.0 | 0.97~3.21 | |||||||||
| 1.25 | 0.85~2.78 | |||||||||
| WZS-30PMA | 0.8 | 1.55~5.12 | 30 | 66 | 1 1/2″ | 7 | 40 | 1500x1150x1500 | 1150 | 1 1/2″ |
| 1.0 | 1.255~4.43 | |||||||||
| 1.25 | 1.1~3.63 | |||||||||
| WZS-37PMA | 0.8 | 1.91~6.30 | 37 | 66 | 1 1/2″ | 9 | 40 | 1500x1150x1500 | 1200 | 1 1/2″ |
| 1.0 | 1.60~5.33 | |||||||||
| 1.25 | 1.42~4.77 | |||||||||
| WZS-45PMA | 0.8 | 2.50~8.30 | 45 | 68 | 1 1/2″ | 10 | 90 | 1800x1300x1750 | 1490 | 2″ |
| 1.0 | 1.91~6.30 | |||||||||
| 1.25 | 1.70~5.56 | |||||||||
| WZS-55PMA | 0.8 | 3.0~9.76 | 55 | 69 | 1 1/2″ | 12 | 100 | 1800x1300x1750 | 1570 | 2″ |
| 1.0 | 2.60~8.55 | |||||||||
| 1.25 | 2.30~7.67 | |||||||||
| WZS-75PMA | 0.8 | 3.95~13.00 | 75 | 72 | 1 1/2″ | 18 | 100 | 1800x1300x1750 | 1750 | 2″ |
| 1.0 | 3.40~11.50 | |||||||||
| 1.25 | 3.0~9.70 | |||||||||
| WZS-90PMA | 0.8 | 5.0~16.60 | 90 | 73 | 1 1/2″ | 20 | 120 | 2200x1550x1800 | 2450 | 2 1/2″ |
| 1.0 | 4.30~14.66 | |||||||||
| 1.25 | 3.72~12.60 | |||||||||
| WZS-110PMA | 0.8 | 6.0~19.97 | 110 | 77 | 1 1/2″ | 24 | 120 | 2200x1550x1800 | 2580 | 2 1/2″ |
| 1.0 | 5.0~16.66 | |||||||||
| 1.25 | 4.65~15.56 | |||||||||
| WZS-132PMA | 0.8 | 6.75~22.52 | 132 | 77 | 2″ | 30 | 120 | 2200x1550x1800 | 2700 | 2 1/2″ |
| 1.0 | 6.0~19.97 | |||||||||
| 1.25 | 5.07~16.90 | |||||||||
| WZS-160PMA | 0.8 | 8.5~28.11 | 160 | 79 | 3″ | 35 | 160 | 3000x1800x2100 | 3900 | 3″ |
| 1.0 | 706~25.45 | |||||||||
| 1.25 | 6.7~22.52 | |||||||||
| WZS-185PMA | 0.8 | 10~33.97 | 185 | 79 | 3″ | 38 | 160 | 3000x1800x2100 | 4050 | 3″ |
| 1.0 | 8.72~29.00 | |||||||||
| 1.25 | 7075~25.210 | |||||||||
| WZS-200PMA | 0.8 | 11.2~36.75 | 200 | 80 | 4″ | 42 | 200 | 3100x1850x2100 | 4200 | 4″ |
| 1.0 | 9.68~32.78 | |||||||||
| 1.25 | 9.2~29.24 | |||||||||
| WZS-220PMA | 0.8 | 12.2~39.67 | 220 | 80 | 4″ | 47 | 200 | 3100x1850x2100 | 4400 | 4″ |
| 1.0 | 11.2~36.75 | |||||||||
| 1.25 | 9.0~29.63 | |||||||||
| WZS-250PMA | 0.8 | 13.5~44.78 | 250 | 80 | 4″ | 53 | 200 | 3100x1850x2100 | 4800 | 4″ |
| 1.0 | 12.3~39.67 | |||||||||
| 1.25 | 10.2~33.97 |
Before quotation:
1.Before quoting, what should users offer?
1).Discharge pressure (Bar, Mpa or Psi)
2).Air discharge/Air flow/Air capacity (m3/min or CFM)
3).Power supply (220/380V, 50/60Hz, 3Phase)
2.If I don't know the pressure and air flow, what should I do?
1).Take the picture of nameplate, we will advise the suitable air compressor to you.
2).Tell us what industry you are, we can advise the suitable one (so as to air tank / air dryer / air filters).
High Efficiency PM Motor and Energy Saving
*With the high-performance permanent magnet material, PM motor won't lose magnetism even under 120°c and can run for more than 15 years.
*No motor bearing: permanent magnet rotors is installed directly on the stretch out shaft of Male rotor. This structure doesn't have the bearing and eliminates the motor bearing fault.
*Comparing to normal variable speed motor, the permanent magnet synchronous motor performs with even better energy efficiency. Especially in the low-speed condition, it can still maintain a high motor efficiency.
SHIPPING
Delivery: time 5-25 working days after payment receipt confirmed(based on actual quantity)
packing:standard export packing. or customized packing as your
Professional: goods shipping forwarder.
FAQ
Q: OEM/ODM, or customers logo printed is available?
Yes, OEM/ODM, customers logo is welcomed.
Q: Delivery date?
Usually 5-25 workdays after receiving deposit, specific delivery date based on order quantity
Q: what's your payment terms?
Regularly doing 30% deposit and 70% balance by T/T, Western Union, Paypal, other payment terms also can be discussed based on our cooperation.
Q: How to control your quality?
We have professional QC team, control the quality during the mass production and inspect completely goods before shipping.
Q: If we don't have shipping forwarder in China, would you do this for us?
We can offer you best shipping line to ensure you can get the goods timely at best price.
Q: come to China before, can you be my guide in China?
We are happy to provide you orservice, such as booking ticket, pick up at the airport, booking hotel, accompany visiting market or factory
Thank you very much for viewing this page, and wish you a nice day!
Contacts:Vicky Liu
Mob: +86-173-1655-1856