Integrated air tank air dryer screw air compressor
Belt driven type Screw Air Compressor Specifications
* Genuine belt to meet the demand of heavy-duty, long life and high reliability.
* Convenient belt tensioning device makes the maintenance easy,and the transmisstion high-efficiency is ensured.
* Provide the flexibility for the customers easily modify the working pressure if a change becomes necessary.
* Low operation cost
* Energy saving
KP-LB Belt Drive Integrated Type Screw Air Compressor with air tank air dryer
Power range: 20hp ~ 600hp
Pressure: 7-13 Bar
* 7bar/8bar/10bar/12.5bar working pressure(discharge pressure) for your selection (for more lower pressure 4bar or 6bar, please send your inquiry )
* Intelligent microcomputer control system, controller has the remind & record function, show the compressor operation situation clearly
* Superior components, low maintenance cost
* Germany OPTI belt, easy for replace, and ensure the product quality
* Oversize air-end, low rpm, no overheat problem
* IP54/IP55 high quality motor, SKF bearing, Class F level insulation; Class BTemperature rise;
* Discharge temperature= Ambient temperature+15ºC, with cooling/ventilation system tailor made to the same local hot-humid climatic condition, NO OVERHEATING ON CONTINUOUS 100% LOAD IS GUARANTEED!
* Top door is locking design, easy to open to clean the cooler and fan
*Compressor is filled with lubrication oil before delivering, you can operate it after installed and powered on. Once it run 500hours to change the new air filter and oil filter was set for first maintenance, then normally change them with 2000-3000hours for once maintenance replacing new one.
* Phase reversal protection, current overload protection, pressure protection, overheat protection
| Model No. | Motor Power (kw) | Power(Hp) | Air delivery(m³/mim) | Working pressure(bar) | Lubricant Oil (L) | Outlet Pipe Dia | L*W*H(mm) | N.W(KG) |
| KP-LD-22 | 22 | 30 | 3.5 | 7 | 15 | G1" | 1300×850×1220 | 550 |
| 3.3 | 8 | |||||||
| 3 | 10 | |||||||
| 2.6 | 13 | |||||||
| KP-LD-30 | 30 | 40 | 5.2 | 7 | 20 | G1-1/2" | 1550×950×1380 | 700 |
| 5.0 | 8 | |||||||
| 4.5 | 10 | |||||||
| 3.8 | 13 | |||||||
| KP-LD-37 | 37 | 50 | 6.5 | 7 | 20 | G1-1/2" | 1550×950×1380 | 800 |
| 6.2 | 8 | |||||||
| 5.7 | 10 | |||||||
| 4.8 | 13 | |||||||
| KP-LD-45 | 45 | 60 | 8.0 | 7 | 20 | G1-1/2" | 1550×950×1380 | 960 |
| 7.5 | 8 | |||||||
| 6.9 | 10 | |||||||
| 6.0 | 13 | |||||||
| KP-LD-55 | 55 | 75 | 10.3 | 7 | 30 | G2" | 1700×1100×1520 | 1600 |
| 9.6 | 8 | |||||||
| 8.7 | 10 | |||||||
| 7.5 | 13 | |||||||
| KP-LD-75 | 75 | 100 | 13.5 | 7 | 35 | G2" | 2100×1200×1650 | 1900 |
| 12.5 | 8 | |||||||
| 11.2 | 10 | |||||||
| 10.0 | 13 | |||||||
| KP-LD-90 | 90 | 125 | 16.3 | 7 | 40 | DN50 | 2200×1250×1650 | 2100 |
| 15.9 | 8 | |||||||
| 14.0 | 10 | |||||||
| 12.2 | 13 | |||||||
| KP-LD-110 | 110 | 150 | 21.0 | 7 | 50 | DN65 | 2500×1500×1950 | 3400 |
| 20.0 | 8 | |||||||
| 17.0 | 10 | |||||||
| 14.8 | 13 | |||||||
| KP-LD-132 | 132 | 180 | 23.5 | 7 | 50 | DN65 | 2500×1500×1950 | 3400 |
| 22.5 | 8 | |||||||
| 21.0 | 10 | |||||||
| 18.0 | 13 | |||||||
| KP-LD-160 | 160 | 220 | 28.0 | 7 | 60 | DN80 | 2600×1500×1950 | 4000 |
| 26.5 | 8 | |||||||
| 24.5 | 10 | |||||||
| 20.3 | 13 | |||||||
| KP-LD-185 | 185 | 250 | 32.0 | 7 | 60 | DN80 | 2800×1560×1920 | 4000 |
| 30.0 | 8 | |||||||
| 27.8 | 10 | |||||||
| 24.5 | 13 | |||||||
| KP-LD-200 | 200 | 280 | 34.3 | 7 | 60 | DN80 | 2800×1700×1950 | 4200 |
| 32.9 | 8 | |||||||
| 30.2 | 10 | |||||||
| 27.2 | 13 | |||||||
| KP-LD-220 | 220 | 300 | 36.0 | 7 | 100 | DN100 | 3360×2000×2000 | 4500 |
| 34.2 | 8 | |||||||
| 30.2 | 10 | |||||||
| 27.5 | 13 | |||||||
| KP-LD-250 | 250 | 340 | 43.5 | 7 | 100 | DN100 | 3360×2000×2000 | 4900 |
| 41.8 | 8 | |||||||
| 38.0 | 10 | |||||||
| 34.5 | 13 | |||||||
| KP-LD-315 | 315 | 400 | 57.6 | 7 | 220 | DN125 | 4200×2250×2275 | 5700 |
| 54.5 | 8 | |||||||
| 50 | 10 | |||||||
| 43.4 | 13 | |||||||
| KPLD-355 | 355 | 480 | 64.5 | 7 | 220 | DN125 | 4200×2250×2275 | 6200 |
| 62.2 | 8 | |||||||
| 56.0 | 10 | |||||||
| 48.6 | 13 |
*Standard Power Supply: 380V/50Hz/3ph *Exhaust Temperature: Ambient Temperature +15ºC
*Configurated normal temperature type Air dryer,with Dew Point range: 3-10ºC;
*Please contact us for any specification that is not within the above mentioned standard.
Welcome to join us !
We Consider Our Customers as Our Friends and Families, and We do Believe in the Win-Win Situation for Building up Long-Term Relationship.
• Innovation
Provide innovative, stable products and services.
• Quality
Deliver consistently superior performance and pursue every possible improvement.
• Agility
Identify emerging trends and act quickly to acquire new opportunities.
• Customer Satisfaction
Anticipate customer needs and exceed their expectations.
• Warranty
Within 12 months since the customer used,or 18 months since shipped from factory, no matter which expires, we ensure that no defects for material and manufacturing.
We Consider Our Customers as Our Friends and Families, and We do Believe in the Win-Win Situation for Building up Long-Term Relationship.
• Innovation
Provide innovative, stable products and services.
• Quality
Deliver consistently superior performance and pursue every possible improvement.
• Agility
Identify emerging trends and act quickly to acquire new opportunities.
• Customer Satisfaction
Anticipate customer needs and exceed their expectations.
• Warranty
Within 12 months since the customer used,or 18 months since shipped from factory, no matter which expires, we ensure that no defects for material and manufacturing.
