Mam6080 Screw Air Compressor Manufacturing Controller

Factory wholesale air compressor controller Replacement screw air compressor parts industrial controller panel MAM 860 880Working life80,000 HoursVoltageDC 16V-28VModelMAM-6070Applicationscrew compressorProduct size225*157*63.1mmMaterial PlasticScreen size206*149mmWarranty1 yearDigital Input6Power15WDigital Output6MOQ1 Piec

Featured Products

Factory wholesale air compressor controller Replacement screw air compressor parts industrial controller panel MAM 860 880
Working life
80,000 Hours
Voltage
DC 16V-28V
Model
MAM-6070
Application
screw compressor
Product size
225*157*63.1mm
Material 
Plastic
Screen size
206*149mm
Warranty
1 year
Digital Input
6
Power
15W
Digital Output
6
MOQ
1 Piece
Pressure
4-20mA: 1pc
Price
USD 140.00
Temperature
PT100/PT1000: 1pc
Port
Tianjin/Shanghai
Terminal
(Socket or screw )
Screw
RS485
Optional
Pressure transmitter or Pressure switch
Optional
Current
6

 

Specifications & Features

1. Multiple run mode optional.
2. 5-inch color screen, with button and touch penal.
3. When the frequency conversion is controlled, any type of frequency converter controller is supported.
4. Support real-time power consumption and accumulative power consumption measurement.
5. Scheduled on/off function and scheduled pressure function optional
6. More accurate in writing frequency to control inverter through 485 communication
7. Free to control all inverter supporting MODBUS RTU protocol.
8. Open phase, current overload, current unbalance, high voltage, low voltage protection for the motor.
9. High integration, high reliability, high-cost performance

Mam6080 Controller for Screw Air Compressor Manufacture
Detailed Images
 
1.10Maintenance parameter
Maintenance parameter is used to store maintenance data. Maintenance password is required for check and modification


1.12 Touch Calibration
Touch calibration is used to adjust touch accuracy. Touch calibration password is required for adjustment.
After entering touch calibration menu, use fingertip or other tool with sharp head to click A ,B ,C ,D in sequence. Press "S" button to restart and save the modification ; If user wants to calibrate again, press reset button and reset following precious step.
1.13Scheduled P
Scheduled P is used to set scheduled pressure. Scheduled P password is required for check and modification. 


1.14 Scheduled On-Off
Scheduled On-Off is used to set one week scheduled on-off time, four period is allowed to set in one day. Scheduled On-Off password is required for check and modification. Main function is below.When set to 00:00, the correspondent function is invalid.
1.15 History Record
Record history fault for user to find causes and solutions.100 items are allowed to record.


Controller Function and Technical Parameter
2.1 Ambient temperature:-20ºC~+60ºC;Humidity:≤98%;
2.2 Digital input& output:6 points of digital input(function optional),6 points of digital relay output
2.3 Analog input& output:1 point of Pt100 temperature input, 1 point of 4-20mA pressure input, 2 groups of three phases current input (CT provided)
2.4 Input voltage of phases: 380V/ 220V.
2.5 High voltage, low voltage protection.
2.6 Controller operation power supply:AC16-28V,15VA
2.7 Measurement :
2.7.1 DISC T:-50~350ºC,Accuracy:±1ºC.
2.7.2 Running time:0~999999hours.
2.7.3 Current:0~999.9A.
2.7.4 Pressure:0~1.60MPa.Accuracy;0.01Mpa.
2.8 Phase anti-reversal protection: When compressor is at stop mode and detects phase reversal, response time≤ 1s
2.9 Motor protection: This controller provides open phase, unbalance and overload protection to motor, and also, provides overload protection to fan.
2.9.1, Open phase protection:When any phase opens, the response time equals to set time;This function is not activated when OPEN PHASE PROTECTION time is set over 20s
2.9.2, Unbalance protection: when MAX-MIN current >= SET DATA *MIN current/10 ,respond time is 5s;
2.9.3, Protection features of overload (time unit: second),please see following table(table 2.9.3.1)for your reference. Multiple=Iactual/Iset ,response time is shown in following table (table 2.9.3.1) according to overload multiples from 1.2 times and 3.0 times .
Iactual/Iset

Table 2.9.3.1 curve table for protection of motor
2.10 Temperature protection: when actual temperature measured is higher than temperature set; response time≤2s;
2.11 Contact capacity of output relay: 250V,5A;Contact endurance :500000 times
2.12 Current error is less than 1.0%.;
2.122 points of RS485communication port. 1 point is for block mode or computer communication.
The other point is for inverter communication like reading inverter run parameter, controlling inverter on-off or adjusting inverter frequency.
2.14 Remote control compressor: When set as REMOTE, user can remotely control the compressor.


Mam6080 Controller for Screw Air Compressor ManufactureMam6080 Controller for Screw Air Compressor ManufactureMam6080 Controller for Screw Air Compressor ManufactureMam6080 Controller for Screw Air Compressor ManufactureMam6080 Controller for Screw Air Compressor Manufacture
Mam6080 Controller for Screw Air Compressor Manufacture
 
Mam6080 Controller for Screw Air Compressor Manufacture
Other Products
 
IP54 protection level motor 120 psi 30KW Air Compressor VSD inverter Screw Compressor
100HP 75KW Rotary Direct Driven air compressor 12.5m3/min capacity Air Compressor
Mam6080 Controller for Screw Air Compressor Manufacture
15hp 1.2m3/min 120 psi Oil Free Scroll Air Compressor for Dental Hospital
Mam6080 Controller for Screw Air Compressor Manufacture
 7.5KW 10HP 8bar Belt driven Screw Compressor
Mam6080 Controller for Screw Air Compressor Manufacture
 7.5KW 10HP Screw compressor with 1.2m3/min Air Dryer
 
 IP54 MOTOR INVERTER CONTROLLER 75KW 100HP AIR COMPRESSOR
Mam6080 Controller for Screw Air Compressor Manufacture
Our Company
 
KEEPWIN TECHNOLOGY HEBEI CO.,LTD is a good stable quality supplier in China compressor factory, located in Hebei Province, China. Our Factory professional in customizing manufacturing high quality gas compressor above 17years. With advanced assembly, production line and testing equipment to support us to develop, design and Manufacture screw air compressor, reciprocating compressor, Diaphragm compressor that comply with the regulation of ISO9001:2008 quality system. Also specializes in mating remolding and sales service of compressors as well as the corresponding pre-and post-position purifying equipment.

KEEPWIN Offers you various range of gas compressor like normal standard VSD Two Stage screw compressor, reciprocating piston type & diaphragm compressor of CNG compressor, Natural Gas Compressor, CO2 compressor, Hydrogen compressor, Nitrogen booster compressor, Methane Compressor, etc. for your process handling needs. These products are developed with the highest Level of professionalism and innovation. The products are then sent to the Quality Control Department for stringent quality Tests on various parameters.

Above gas compressor are widely used in each Industry, such as Oil Industry, Chemical, Electronic, Garment, Plastic, Glass, Cement, Water treatment, Agriculture, Food, Construction, Joinery, etc.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours