air horn 12v air compressor, air compressor with tank, air horn compressor 12v

Permanent Magnetic MotorDimensions: 432mm L x 160mm W x 181mm HMax Working Pressure: 120 PSITank Capacity: 3 litersPressure Switch Settings: 85PSI on, 105 PSI offTank Fill Time (0-105psi): 1Min.58Sec.Recovery Time (85-105psi): 21 Sec.Duty Cycle: 10%@100psiInline Check ValveFlow Rate @ 0 PSI: 1.27CFM (36LPM)Amp Draw: 12ATher

Featured Products

Air Compressor for Air Horn 12V, Air Compressor with Tank, Air Horn Compressor 12V
Air Compressor for Air Horn 12V, Air Compressor with Tank, Air Horn Compressor 12V
Air Compressor for Air Horn 12V, Air Compressor with Tank, Air Horn Compressor 12V
Air Compressor for Air Horn 12V, Air Compressor with Tank, Air Horn Compressor 12V

Permanent Magnetic Motor

Dimensions: 432mm L x 160mm W x 181mm H

Max Working Pressure: 120 PSI

Tank Capacity: 3 liters

Pressure Switch Settings: 85PSI on, 105 PSI off

Tank Fill Time (0-105psi): 1Min.58Sec.

Recovery Time (85-105psi): 21 Sec.

Duty Cycle: 10%@100psi

Inline Check Valve

Flow Rate @ 0 PSI: 1.27CFM (36LPM)

Amp Draw: 12A

Thermal Protection: Yes

A098

PSI

CFM

LPM

A

0

1.27

36.0

9

10

1.06

30.0

10

20

0.92

26.0

11

30

0.85

24.0

11

40

0.81

23.0

12

50

0.78

22.0

12

60

0.74

21.0

12

70

0.71

20.0

13

80

0.67

19.0

13

90

0.64

18.0

13

100

0.60

17.0

12

110

0.53

15.0

11

120

0.46

13.0

11

130

0.42

12

11

140

0.35

10

10

150

0.32

9

10

Good replacement to Accuair AA-VU4  Air suspension valve block With E-level
Structure:Control
Pressure:High Pressure

Power:Solenoid
Material:Alloy
Temperature of Media:High Temperature
Media:Air
Port Size:1/4" 3/8" 1/2"
Place of Origin:China (Mainland)
Model Number:VU2
Brand Name:ALITA PNEUMATIC
Application:Air Suspension, Air Suspension
Air Ride Suspension Manifold Valve 1/2" Fast Air Bag System Control
VU4 valves air engine custom parts, Improved diaphragm design, more efficient coil with less current draw, 9 foot switch box wire harness AIR BAG SUSPENSION VALVE BLOCK The New Design Air Suspension Solenoid Valve (Accuair Solenoid Valve Manifolds)  is engineered to provide the cleanest installation and most reliable operation on the market. This electronic solenoid valve unit inflates and deflates up to (4) individual Air Springs and has built-in push-to-connect 3/8" D.O.T. approved air fittings for all of its plumbing connections. It's more smart than our previous manifolds Assembly Valve Block wiring harness 160-4F Solenoid Valve.Good replacement to Accuair AA-VU4  Air suspension valve block With E-level
Compatiable Suspension Type4-Corner Full Air Suspension
Voltage Requirements  10.5-16 Volts
Current Requirements 1.1 Amps (for each of the (8) Valves)
Connectors IP67 certified (immersion up to 3 ft)
Fitting Size 3/8" D.O.T. / P.T.C (x 8), 1/4" NPT (x 4)
No. of Inlet Ports 2
No. of Exhaust Ports2
Max Operating Pressure 200Psi
Cv Flow Factor 0.33
Average Adjustment Time 2.2 Seconds (from 10% to 50% of travel)

The VU4 4-Corner Valve and VU2
 2Corner Valve Units are engineered to provide the cleanest installation and most reliable operation on the market. The VU4 electronic solenoid valve unit inflates and deflates up to (4) individual Air Springs and has 1/4" NPT ports for use with any fittings that you choose for all of its plumbing connections. The VU2 electronic solenoid valve unit inflates and deflates up to (2) individual Air Springs and has 1/4" NPT ports for use with any fittings that you choose. The robust internal solenoid valve architecture maximizes flow rates, provides bubble-tight sealing, and guarantees operation up to 200 psi for millions of cycles. All of this technology is housed in a unique enclosure design which routes each of the solenoid wires to a single weatherproof connector, eliminating typically loose wires. This not only improves the appearance, but it also guarantees proper operation for every installation. With an overall size of only 5"x 3"x 3" with the VU4 and 3.08"x 2.75"x2.75" with the VU2 and the ability to survive harsh under vehicle environments, this product is ideal for any application.
1/4" NPT  3/8NPT FITTINGS FOR ALL PORTS
This VU4/VU2 valve unit inflates and deflates up to (4) individual Air Springs or (2) individual Air Springs and has all 1/4" NPT threaded ports, (no fittings included).
PRE-WIRED WITH PLUG-N-PLAY CONNECTOR
High quality weather-proof plug-n-play harnesses make for fast and accurate wire connections that will last in the harsh under-vehicle environment.
ALL STAINLESS STEEL VALVE COMPONENTS 200 PSI DIRECT OPERATED BUBBLE-TIGHT VALVES
The robust internal solenoid valve architecture maximizes flow rates, provides bubble-tight sealing, and guarantees operation up to 200 psi for millions of cycles.
Air Compressor for Air Horn 12V, Air Compressor with Tank, Air Horn Compressor 12V
Air Compressor for Air Horn 12V, Air Compressor with Tank, Air Horn Compressor 12V

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours